SUPER PEEWEE V

The Chapman Leonard 5 Series dolly lineup is an impressive array of dollies that offer a range of features and accessories for the dolly grip. The Super Peewee 5, Hybrid 5, and Hustler 5 are all equipped with a lithium battery for reliable and uninterrupted power.

Cinegrip is the only rental house in Greece having available Chapman Leonard equipment.

Three-mode steering transmission with conventional, crab, and round steering, which allows shifting to be done through the steering column.

 5 Series dollies have 3 methods of charging 120 AC, 220 AC, and built in lithium battery. The on-board battery allows up to 50 charges and allows up to 6 hours of continuous use.

Larger hydraulic capacity that requires less recharging & can handle higher payloads.

The Five Series arm provides greater operator clearance, a valve concept for easy control and greater speed with added precision, and a stop valve requiring no tools for adjustments.

The lightweight aluminum sideboard system provides complete walk around ability at both the high and low levels. The 5 series arm allows for lower camera setups.

The five series lineup offers additional accessories such as an off-road wheel accessory for transport over rough terrain. The 5 series will work on both straight and curved 24 1/2 tubular track or 880 MM track.

Items include:

Super PeeWee V ACCESSORY KIT
3″ CAMERA RISER
6″ CAMERA RISER
16″ EXTENSION 2/CAM PLATE
24″ EXTENSION 2/CAM PLATE
12″ DOLLY SEAT RISER-LONG POST
SEAT OFFSET ARM – LONG POST
TRACKING BAR,SPW IV
STANDING BOARD, PW/SPW IV
SPW IV + COMPLETE BOARD PACK
FRNT SHORT LIFT BAR,SPW IV/IV+ (x2)
REAR LONG LIFT BAR, SPW IV/IV+ (x2)
CASTLE RING WRENCH WITH HOLES
GRIP POUCH,SPW IV – 2ND MODEL

SUPER PEEWEE III+

Incorporates a Universal Leveling Head that Locks into 4 Different Positions New Arm Design increases Vertical Travel and Rigidity Hardened Stainless Steel Bushings Compact and Lightweight for Travel and Storage Improved Arm System allows for up to 4 full Lifts on one charge.

Cinegrip is the only rental house in Greece having available Chapman Leonard equipment.

Carrying Weight 280 lb 127 kg
Maximum Payload 250 lb 113 kg
Maximum camera mount height (position 1 – 90º mode) 4 ft. 11 3/4 in. 1.51 m
Minimum camera mount height (position 1 – 90º mode) 29 1/2 in. 74.93  cm
Vertical boom travel (position 1 – 90º mode) 30 1/4 in. 77 cm
Maximum camera mount height (position 2 – 45º mode) 4 ft. 9 1/2 in. 1.46 m
Minimum camera mount height (position 2 – 45º mode) 25 1/2 in. 65 cm
Vertical boom travel (position 2 – 45º mode) 32 in. 81 cm
Maximum camera mount height (position 3 – low mode) 4 ft. 2 1/2 in. 1.28 m
Minimum camera mount height (position 3 – low mode) 19 1/4 in. 48 cm
Vertical boom travel (position 3 – low mode) 31 /4 in. 79 cm
Maximum camera mount height (position 4 – extender mode) 4 ft. 11 in. 1.49 m
Minimum camera mount height (position 4 – extender mode) 20 3/4 in. 53 cm
Vertical boom travel (position 4 – extender mode) 38 1/4 in. 97 cm
Minimum camera mt height (low bar/lowest 4-way leveling head) 5 in. 12 cm
Maximum camera mt height (low bar/lowest 4-way leveling head) 36 in 91 cm
Maximum payload with high post kit 1,100 lb 499 kg
Maximum Boom Lifts (fully charged) 4 Lifts
Chassis Maximum Length (wheels fully extended) 43 in. 1.09 m
Chassis Minimum Length (wheels fully retracted) 34 1/2 in. 88 cm
Minimum chassis height for transportation 43 in. 1.09 m
Chassis width – legs at 0º position 34 1/2 in. 88 cm
Chassis width – legs at 17º position 16 in. 41 cm
Chassis width – legs at 45º position 20 in. 51 cm
Chassis width – legs at 90º position 32 in. 81 cm
Steering post height 35 in. 89 cm
Minimum turn radius 24 in. 61 cm
Minimum door width PeeWee can be carried through 16 in. 41 cm
Accumulator charging time (empty to full) 60 sec.
Operational weight 329 lb 149 kg
Operational Weight w/ High Post Kit (no payload) 386 lb 175 kg

1 x SUPER PEEWEE III+ CAMERA DOLLY   s.n 396
2 x DOLLY SEAT W/ LOCKING PIN 
 1 x 12″ DOLLY SEAT RISER-LONG POST 
 1 X VALVE CONTROL HANDLE
1 X STEERING COLUMN COMPLETE,
1 X FRONT BOARD – PEEWEE
1 X PEEWEE NARROW SIDEBOARD
1 X MEDIUM TIRE, PW-SPW IV SET (8)
8 X WASHER(COUNTERSUNK) W/SCREW
1 X UNIVERSAL HEAD,SPW III+/SPW IV
1 X LEVELING HEAD 4-1/2″ RISE
1 X NUT,SPW III/IV SWING HEAD ADJ
1 X UNIVERSAL LOW PLATE
1 X  UNIVERSAL WRENCH,YR MODEL 2012
1 X  UNIVERSAL STOP VALVE,SPW 2/3+
1 X 12″ CAMERA RISER
1 X  CASTLE RING – MITCHELL
1 X 16 INCH CAMERA EXT/2 CAM PLATE
1 X 24 INCH CAMERA EXT/2 CAM PLATE
1 X 36 INCH CAMERA EXT/2 CAM PLATE
1 X EUROBOSS RED 
 1 X CART 

PANTHER EVO PLUS +HI-LOW TURNSTILE

The new Panther Evolution continuess to maintain the basic advantages of its predecessor. Simultaneously it represents an unprecedented innovation. The Evolution is a completely new dolly  resulting from a continuous evolution over a period of more than 25 years.

Length: 84 cm (33´´)
Width: min. 53,5 cm (21´´) /
max. 82,5 cm (32.5´´)
min. height: 68 cm (26.5´´)
max. height: 138 cm (54.5´´)
narrow track / wide track
Track width: 36 cm (14´´) / 62 cm (24.5´´)
Wheel base: 75 cm (29.5´´) / 62 cm (24.5´´)
Ground clearance: 2,5 cm (1´´)
Ground clearance
with distance axes: 6,5 cm (2.5´´)
Column lift: 100 % (68 cm / 27´´)
Turning circle: 197 cm (6.5´)

max. speed: 2 sec. (0-100%)
Battery charging time with
Combi charger (2 batteries): 7 hrs
Operating time with 2 batteries
with 250 kg load (20°C): 150-300 drives
allowable temperature range: – 20°C bis + 70°C

Transport weight: 96 kg (210 lbs)
Operating weight: 136 kg (300 lbs)
Column lifting force: 250 kg (550 lbs)

PANTHER III CLASSIC

Universal dolly with wheels combined. Equipped with electromechanical column c possibility of programming a vertical Lifting in a given time and speed modes. Wheels: standard rail and Quilted. This dolly is one of the most versatile and often used when shooting on location, being the perfect synthesis between mobility and smoothness in the camera movements

Length: 84 cm (33´´)
Width: min. 53,5 cm (21´´) /
max. 82,5 cm (32.5´´)
min. height: 68 cm (26.5´´)
max. height: 138 cm (54.5´´)
narrow track / wide track
Track width: 36 cm (14´´) / 62 cm (24.5´´)
Wheel base: 75 cm (29.5´´) / 62 cm (24.5´´)
Ground clearance: 2,5 cm (1´´)
Ground clearance
with distance axes: 6,5 cm (2.5´´)
Column lift: 100 % (68 cm / 27´´)
Turning circle: 197 cm (6.5´)

max. speed: 2 sec. (0-100%)
Battery charging time with
Combi charger (2 batteries): 7 hrs
Operating time with 2 batteries
with 250 kg load (20°C): 150-300 drives
allowable temperature range: – 20°C bis + 70°C

Transport weight: 96 kg (210 lbs)
Operating weight: 136 kg (300 lbs)
Column lifting force: 250 kg (550 lbs)

DINKY DOLLY 156/D

The Dinky Dolly is a unique, portable, 4 wheel steering dolly manufactured with a solid frame. Equipped with pneumatic wheels, a push/pull bar which can be operated from either end of the dolly, and if needed, a seat support system. The steering mechanism enables a very tight and accurate turning circle. To run the Dinky Dolly on track (straight or curved,) we offer very smooth running boogie wheels as an option. By using the platform dolly jacks you create a solid camera platform out of the Dinky Dolly which can very easily be used at all types of sport events.

Type: platform
Maximum load: 200 kg
Width: 75 cm
Length  : 80 cm
Height: 30 cm
Weight: 29 kg
Type of wheels: hardrubber – track – pneumatic

PORTA GLIDE DOLLY SLEDS

BUTT DOLLY