Ronin 2 Professional Combo

 – Most versatile professional 3-axis stabilization system
– Monocoque carbon fiber frame design
– High torque motors supporting cameras up to 30 lbs
– Fine tune balancing for precision control
– Self-heating hot-swappable batteries
– On-board power for camera and accessories
– Integrated camera controls
– Built-in GPS & compatible with DJI A3 Flight Controller

Inspire 2 - TB50 Intelligent Flight Battery 4280mAh

Each pair provides Max 25 minutes* flight time with the Zenmuse X5S, 27 minutes* flight time with the Zenmuse X4S. The new Inspire 2 battery uses higher performance and a higher density battery cell with an overall larger capacity as well as an updated management unit. Its performance in low temperature environments has been optimized with a built-in 70W self-heating system capable of heating itself to 41°F (5°C) every minute. This self-heating function can be enabled either automatically or manually. The management unit constantly monitors battery status, making all information, including battery level and battery temperature, easily visible in DJI GO.

Capacity: 4280 mAh
Voltage: 22.8 V
Battery Type: LiPo 6S
Energy: 97.58 Wh
Net Weight: 515 g
Charging Temperature: 41° to 104° F (5° to 40° C)
Operating Temperature: 14° to 104° F (-10° to 40° C)
Max Charging Power: 180 W

Compatibility

Inspire 2
Ronin 2
Inspire 2 Battery Insulation Sticker
Inspire 2/Ronin 2 Battery Charging Hub
Inspire 2 Car Charger
180 W Battery Charger (without AC cable)

DJI Force Pro

Employing industry-leading communication technologies and control algorithms, DJI Force Pro is a camera movement control system that allows operators to control gimbals remotely with incredible accuracy. By precisely synchronizing operator movement with camera movement, Force Pro allows operators to capture masterful shots more intuitively than ever.

Ronin 2 Part 56 150mm Ball Mount Adapter

The Ronin 2 150 mm Ball Mount Adapter can be used together with the Ronin 2 Universal Mount to install the Ronin 2 on a carrier, such as a jib or dolly, with a 150 mm ball mount. The adapter has M8, 1/4”-20, and 3/8”-16 holes, allowing other compatible devices to be attached.

Ronin 2 Part 41 Tilt Axis Extension Block 30mm

Mount the Tilt Axis Extender on the Ronin 2’s tilt axis for camera installation.

Easyrig

  • Easyrig 5 Vario Strong GimbalFlex w/ STABIL G3 + Quick Release
  • Camera Hook With Ball Stud
  • Cheese Plate for Vario